Step 1. Connect the lavalier microphone to the transmitter's microphone input.
Step 2. Turn on the transmitter and receiver by rotating the level controls clockwise. The channel indicator LED should light up.
Step 3. Use the channel selector buttons to set the transmitter and receiver to the same channel.
Step 4. Adjust the headphone volume to an appropriate level for monitoring the transmission.
Step 5. Increase the transmitter level control until a sufficient signal is being transmitted to the receiver.
Step 6. Loosen the receiver locking wheel, slide the mounting foot into the camera shoe, and tighten the locking wheel to secure the receiver to the camera.
Step 7. Connect the 3.5mm audio cable from the audio output of the Receiver to the microphone input jack on the camera.
Step 8. Secure the transmitter using the belt clip and attach the microphone to a necktie, lapel, or other garment using the tie clip.
