DMS Equipment Quick Start Guides

EPSON ELPSC80 Projector Screen Quick Start Guide

 

Set Up the Stand

Step 1. Set the screen face-down on the floor

Step 2. Release the Carrying Handle

 

Step 3. Press the latch and remove the stand

 

Step 4. Loosen the knob on the stand and extend the legs fully. Re-tighten the knob.

 

Step 5. Set the stand with the latch facing the wall

 

Attach and Open the Screen

Step 1. Lower the screen onto the stand as shown. The screen self-aligns with the stand.

 

Step 2. Standing in front of the screen, press the latches in the back and open the screen partway

 

Step 3. Stand to one side and pull the screen open fully

Note: Open the screen until you hear it click at the standard (4:3) position. Or open it further to use the widescreen (16:9) position.

EPSON ES1000 Tabletop Projection Screen Quick Start Guide

Open the Screen

1. Lower each foot to lock it in place

Note: Make sure the feet are locked in place or the screen could fall over.

 

2. Press the latches on the front and back of the case to open it

 

3. Open the screen to its full width (50" diagonal)

 

Close the Screen

1. Push each half of the case toward the middle. Make sure the case latches shut.

 

2. Squeeze each foot, then fold it up against the case