DMS Equipment Quick Start Guides

Dell 1650 User Guide

Turning the Projector On

Step 1. Connect the power cord and appropriate signal cables.

 

1  Mini USB connector	8  +5V DC out connector
2  RJ-45 connector	9  RS232 connector
3  VGA input connector	10  Audio input connector
4  VGA output connector	11  Audio output connector
5  Composite Video connector	12 Security cable slot
6  HDMI-1 connector	13  Power cord connector
7  HDMI-2 connector

 

Step 2. Press the POWER button on the remote control to power on.

Step 3. Turn on video source (computer, DVD player, etc.).

Step 4. Change the projector input source if necessary.

Press SOURCE button on remote to change input source.

 

Adjust the projected image:

Step 1. Raising or lowering the projector height

1. Raise or lower the projector and use the front tilt adjustment wheel to fine-tune the display angle.

 

Step 2. Adjusting the projector zoom and focus

1. Rotate the zoom tab to zoom in and out
2. Rotate the focus ring until the image is clear

 

 

Turning the Projector Off

Step 1. Press the POWER button on the remote control to power off.

"Press Power Button to Turn off Projector" message appears on screen.

Step 2. Press the POWER button on the remote control again to power off the projector.

The cooling fans continue to operate for 120 seconds.

Step 3. After the cooling fans have stopped, disconnect the power cord and signal cables.